Results 1 to 9 of 9
Threaded View
-
12-21-2016, 02:35 PM #3
- Join Date
- Apr 2016
- Posts
- 120
My experience is that 3mm works better over Bowden printers - less flex in the filament. There are also a few filaments only available in 3mm - but far more only available in 1.75mm!
You will be spending around $90 to replace the hotend, extruder drive housing and tube / fittings, so you need to ask yourself if this printer remains a bargain.
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)