Results 1 to 10 of 156
Thread: Rumba and Auto-Bed level
Threaded View
-
12-19-2016, 12:06 AM #38
- Join Date
- Sep 2015
- Posts
- 22
I got it all configured and working It wasn't all that hard with the newer firmware.
I should have made a spreadsheet like you for future reference but it wasn't to bad if I had to do it over. Plus I can just copy my current config.
I am so pleased with abl! I will never go back!
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion