Results 1 to 2 of 2
Threaded View
-
12-13-2016, 08:49 AM #2
- Join Date
- Dec 2016
- Posts
- 1
Tikki, I downgrade the firmware one step, and set the settings to default, appear to me that my Makerbot 3D printer is kind of sensitive if I stretch to much the settings, using 10mm distance from object in the raft settings starts that issue, so check your settings and try a test print in default settings.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help