Results 1 to 2 of 2
Threaded View
-
12-08-2016, 09:49 AM #2
- Join Date
- Dec 2016
- Posts
- 2
I was able to solve the problem. All of the pinouts were wrong and I had to re-arrange the pin order in the molex connector.
I was able to solve the problem. All of the pinouts were wrong and I had to re-arrange the pin order in the molex connector.
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)