Results 1 to 10 of 10
Thread: Clicking started after cleaning.
Threaded View
-
12-07-2016, 09:38 PM #10
- Join Date
- Dec 2015
- Location
- Seattle
- Posts
- 38
The filament I'm using I've been running for months, it is getting toward the tail end of the roll though. As far as heat is concerned I have no accurate way to measure it. I'll go pick up a laser thermometer in the next day or two. It gets very hot, and the temp on the printer itself read 227c, when loading/unloading filament.
Using Octave ABS if anyone has experience with them.
Thank you for everything, I'll try a different roll (Same brand) Might just try PLA and see if it will work for now.
Update: Tried a new roll of green ABS. Must be heat.
Would you suggest replacing the heater? Or the temperature probe? Or both?Last edited by TiredJuan; 12-07-2016 at 10:07 PM.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help