Results 1 to 10 of 156
Thread: Rumba and Auto-Bed level
Hybrid View
-
12-06-2016, 11:31 PM #1
- Join Date
- Sep 2015
- Posts
- 22
Haven not fully read through this thread but really wanting to get auto bed leveling setup on my Makerfarm 10" i3V with Rumba board.
I am wishing I had opted for the basic RAMPS because I cant hardly find info for this board....
Anyways can someone with a fully working 10" post a github of there modified Marlin firmware? Would help so much!
-
12-07-2016, 12:01 PM #2
RAMPS is much more standard. I'm in the process of converting all of my printers over to RAMPS. Probably if you post an issue at https://github.com/MarlinFirmware/Marlin/issues somebody will have exactly what you want so you can load your printer with RC-8.
-
12-18-2016, 11:07 AM #3
-
12-18-2016, 05:27 PM #4
-
12-18-2016, 07:06 PM #5
Roxy, no problems for the files to be used, but not being a github user (other than downloading) I don't have a clue about pushing and pulling. Is there a way I can get the files (configuration.h, configuration_adv.h, 1 excel and 1 text) to you and ask you yo post them, or if it is a simple task to point me towards github for dummies so I can do it myself!
-
12-19-2016, 12:06 AM #6
- Join Date
- Sep 2015
- Posts
- 22
I got it all configured and working It wasn't all that hard with the newer firmware.
I should have made a spreadsheet like you for future reference but it wasn't to bad if I had to do it over. Plus I can just copy my current config.
I am so pleased with abl! I will never go back!
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help