Results 1 to 10 of 50
Thread: Another Sintratec kit built
Hybrid View
-
11-02-2016, 04:22 PM #1
- Join Date
- Nov 2016
- Location
- Lancashire, UK
- Posts
- 36
Maybe they tightened up on tolerances because my kit lined up perfectly. I was quite surprised when I dropped the hat onto the core to see the leadscrews go straight through the bearings and into the motor couplers. With regard to ease of operation, I can raise and lower the tables by rotating the coupler by hand so I am hoping the steppers can operate reasonably effortlessly.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help