Results 1 to 10 of 110
Threaded View
-
10-25-2016, 02:30 PM #16
- Join Date
- Mar 2016
- Posts
- 68
I'd probably try adding an extremely thin (0.1mm) raster/mesh to the bottom before tilting, so everything is connected to eachother (so they can't float) with a flimsy support that can be easily broken once done...
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)