Results 1 to 7 of 7
Thread: Make walls thinner on object?
Threaded View
-
08-20-2016, 11:36 AM #5
- Join Date
- Oct 2014
- Posts
- 441
Yeah, I figure the problem is the walls on the model are too thick. If I change it to 1 outer perimeter shell, it's still doing 2 walls with a single shell. I want to get it down to a single wall, I'd prefer to do with 2 shells, but doing with 2 shells is currently doing 2 walls, and 2 shells, which takes a substantial amount of time more. I believe the problem is the model being too thick, that's why I want to thin it out. Other than trying Makerware I still haven't figured it out :P But using Makerware just is going to create more problems because I have a lot of customization in my prints.
https://i.gyazo.com/c73e98d453baa1f8...ea46986d97.png
For some reason my picture isn't showing up on here.Last edited by Bassna; 08-20-2016 at 11:42 AM.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion