Results 1 to 1 of 1
Thread: 3D Printed Raspberry Pi Case
Threaded View
-
03-15-2014, 07:01 PM #1
- Join Date
- Sep 2013
- Location
- New Jersey, USA
- Posts
- 494
3D Printed Raspberry Pi Case
Anyone else here work with Raspberry Pi? I saw this on instructables today and thought it was a pretty clever idea. May try this as a weekend project myself eventually. A man named Rick Winscot came up with this design and posted it on his instructables page.
You will need a 3d printer, and the following parts to make this work:
3mm Fiber Optic Filament
http://thefiberopticstore.com/FOS-mainpage.htm
Gorilla Super Glue
http://www.gorillatough.com/index.php?page=super-glue
2.1mm Panel-mount Barrel Connector
http://www.adafruit.com/products/610
Edimax WiFi Dongle (you could use Ethernet... but you're going to have to modify the model)
http://www.amazon.com/computers-acce.../dp/B005CLMJLU
Gorilla Epoxy
http://www.gorillatough.com/index.php?page=epoxy
According to Rick the average print times will be as follows:
* leaf + stem = 25 mins
* cap = 30 mins
* bottom = 35 mins
* body = 3 hours
* base = 2 hours
* base plate = 30 mins
Here's some picture. Also check out the instructables page here: http://www.instructables.com/id/Very...-Pi-Case-3000/
Printer will print perfect...
Yesterday, 10:44 AM in Tips, Tricks and Tech Help