Results 1 to 1 of 1
Threaded View
-
05-23-2016, 05:40 AM #1
- Join Date
- May 2016
- Posts
- 1
What is the relation between height, width, feed, over and under extrusion?
Hi there,
Newbie here. As the subject asks I need to understand the relation because I am struggling to control my over/under extrusion and my dimensions. The reason I am asking is that this weekend I re-levelled my bed, although I have auto bed levelling. By doing this, the height of the table might have changed and therefore the nozzle height with it.
It now prints the bottom layer with too a small a nozzle height and the upper layers looks over extruded. So I need to know the relation before I just blindly go and change the parameters.
Please give me an explanation of what changes when I change the Feed Rate for instance.
Regards
NicLast edited by Scratchbuild; 05-23-2016 at 05:42 AM. Reason: Editing
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help