Results 1 to 10 of 4110
Thread: Qidi Tech 1 - Replicator 1 clone
Threaded View
-
04-19-2016, 11:45 AM #9
Much appreciated, I'm at 200 hours currently and feel I'm on par with Syd_Khaos' usage of 700 hours in 2 months.
The creaking started at around my 100 hour mark I believe and I've had multiple prints that have lasted 20+ hours. After an extremely long print I check the rods for dirt/grime and re-grease with Super Lube as appropriate. The X-Axis carriage is the one I grease most often with the Z-Axis being the least greased.
My favorite thing to do so far is to load the whole build plate up with different objects, start the print, make sure the first layers are bonded well and then walk away to come back to a full platter of 3D objects.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help