Results 1 to 10 of 4110
Thread: Qidi Tech 1 - Replicator 1 clone
Threaded View
-
04-18-2016, 09:03 PM #10
- Join Date
- Aug 2014
- Posts
- 627
That sounds like something very light hitting something. I had a hose (when I tried a Bowden) tapping like that on my frame until I tied it down. It drove me nuts. Does this printer have any plastic parts? I know of three sold on eBay and if those are loose it could make that creaking/tapping sound I heard in the vid. The more I listen to that it almost sounds like glass or the clear plastic is tapping. maybe the top or the side panel possibly.
My windows in this house do that when the loud thumping music drives by or a jet flies over (I live near the airport). The only fix for the windows is to apply some caulking inbetween the wooden frame and the glass and that kills the sound until I find another making that sound then go after it.Last edited by DarkAlchemist; 04-18-2016 at 09:09 PM.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion