Results 1 to 10 of 26
Thread: Help printing ABS
Threaded View
-
04-07-2016, 12:58 PM #19
- Join Date
- Apr 2016
- Posts
- 6
Unless i missed it the one thing no one has said is, Do not have a fan blowing on the part when printing ABS!
what % infill are you using? the bubbling could be from your infill when it connects to the shell. also check the infill over lap.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion