Results 1 to 7 of 7
Threaded View
-
02-08-2016, 02:35 PM #1
- Join Date
- Oct 2014
- Posts
- 134
Marlin end code - relative distance
I am trying to set my end GCODE to raise the Z axis 25mm above the top of the print.
Right now I am using G1 Z25 F5000 ; lift nozzle but if my print is higher than 25 the
head crashes into the print.
Will this fix that -
G91 ; set relative positioning
G1 Z25 F5000 ; lift nozzle
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help