Results 1 to 10 of 26
Thread: Showcase prints?
Threaded View
-
12-29-2015, 05:47 AM #21
Here is my first print of my own stl object. I sliced it using Cura. Very nice!
The finished object without flash
WP_20151225_012.jpg
The finished object with flash (layers are more visible than with human eyes)
WP_20151225_010.jpg
The object with support structure and adhesion platform done by Cura.
WP_20151225_004.jpg
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help