Results 1 to 4 of 4
Threaded View
-
11-30-2015, 12:37 PM #1
- Join Date
- Nov 2015
- Posts
- 3
Drifting at the end of a job... Da Vinci 1.0
IMG_0493.jpgIMG_0494.jpg
What's up with this? It was going beautifully until almost the end, then this happened. Any ideas??Thanks.
(see attached)
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion