Results 1 to 10 of 20
Threaded View
-
11-26-2015, 10:42 AM #6
Found the solution.....The latest version of ReplicatorG would not work.
The last version works fineLast edited by Ward; 11-26-2015 at 05:06 PM.
Found the solution.....The latest version of ReplicatorG would not work.
The last version works fine
Last edited by Ward; 11-26-2015 at 05:06 PM.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion