Results 1 to 3 of 3
Thread: Please help! 1mm Nozzle Settings
Threaded View
-
10-19-2015, 03:39 PM #1
- Join Date
- Oct 2015
- Posts
- 1
Please help! 1mm Nozzle Settings
I'm currently using a .3 mm nozzle and the print jobs are taking over 9 hours to complete. I purchased a couple of .5 mm nozzles and drilled one out to 1mm. I'm using Slic3r but not sure of the settings once I change over to the 1mm nozzle. ANY help on this would be GREATLY appreciated!
Regards,
Carl
Holes and pockmarks in print walls
Today, 09:14 AM in General 3D Printing Discussion