Results 1 to 10 of 22
Thread: Hexagon vs E3D V6
Threaded View
-
09-14-2015, 01:31 PM #21
- Join Date
- Jul 2014
- Posts
- 305
So I spent some time yesterday trying to narrow down the problem even further.
I got the filament to feed easily by hand so I don't think the nozzle is clogged.I then looked into the diameter of the feed from the hobbled bolt to the extruder and mine is at 4.00mm +/- .2mm.
So I will purchase some aluminum tubing that should narrow that diameter to 2pm like printbus stated above.
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion