Results 1 to 8 of 8
Thread: having issues
Threaded View
-
09-03-2015, 06:07 PM #1
- Join Date
- Aug 2015
- Posts
- 12
having issues
this was printed with skeinforge
setting set at
15% infill
.25 layer height
2 shells
40 feedrate
60 travel
195 temp....
I am super new to 3d printing and have in total 25 hours experience any advice would be great!
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion