Results 1 to 3 of 3
Thread: setting up a glass bed?
Threaded View
-
08-18-2015, 09:14 AM #1
- Join Date
- Dec 2014
- Posts
- 42
setting up a glass bed?
I picked up a glass bed for my PowerSpec 3D Pro. The bed is 1/4" thick. I also have the Z shim printed out. Do I need to set up anything in the Printer's settings so the heads don't crash into the plate? I didn't want to power it up and send the head into the glass.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion