Results 1 to 10 of 18
Thread: Auto-leveling
Threaded View
-
02-12-2014, 04:20 PM #14
- Join Date
- Oct 2013
- Location
- Honolulu, HI
- Posts
- 199
1. The jumped pins are different from the three for the servo. Watch it again and you will see him point to a pair to the left of the servo pins.
2. You have to wire the leveling limit switch to the z-limit connector. Keep the z-limit switch and wire the leveling switch to it in series so that both will work.
Cheers,
KDog
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion