Results 1 to 10 of 27
Threaded View
-
04-13-2015, 09:57 AM #1
- Join Date
- Jan 2015
- Posts
- 68
My Second Print! Still needs some work...
Hi Everyone,
I've been lurking here for a while as I was saving up for my 12" i3v. i got it a few weeks back and took my time putting it together over a few weekends. I printed off a 24mm cube last weekend and I could tell my printer needed some work. I tightened my belts and adjusted my rollers so they would be tight but able to roll. A little grease and a bunch of failed tries and I got my second cube printed last night. The first layer is much better after adjusting my Z height but I never thought to level my X to my Y axis so Ill check that out tonight.
Let me know what you guys think? I believe I am over extruding material so I'll need to look into how to fix that as well. Using Slicr 0.9.9 with the stock config from Colin. Makerfarm silver 1.75mm PLA used.
CalibCube_2_Profile.jpgCalbCube_2_First Layer.jpgCalbCube_2_Layer Details.jpgLast edited by Carrot_or_Stick; 04-13-2015 at 01:14 PM.
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion