Results 1 to 7 of 7
Threaded View
-
04-01-2015, 12:03 PM #1
- Join Date
- Apr 2015
- Posts
- 4
i3v extruder stopping(clicking) a portion of the way into the print
I'll get about 20% of the way into the print and everything is going fine, then the extruder will start clicking and won't turn.
I have the voltage set for it at about .44V. I know the build guide says to go below .39 but it wouldn't turn at any lower voltage.
Pretty lost on this one.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion