Results 1 to 10 of 10
Threaded View
-
03-06-2015, 11:21 PM #1
- Join Date
- Dec 2014
- Posts
- 43
X axis only moves a couple of mm's
So I took apart my extruder with the power off and now when I home the printer the x axis only moves a couple of mm's. While using pronterface I can manually move it to the left side of the printer just fine but when I want to move it to the right it will go about half way and then stop.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion