Results 1 to 3 of 3
Thread: Best procedure for leveling bed
Threaded View
-
02-23-2015, 12:25 PM #1
- Join Date
- Feb 2015
- Posts
- 11
Best procedure for leveling bed
Hi,
Just got an flashforge pro. The instructions I followed for leveling the bed had me turning one screw at a time then moving to the next position . By the time I had adjusted all 3 screws it felt right to me using the piece of paper method to test the distance to the extruder tip. I printed the .2 test box and the top edges are slightly bowed . So now I want to recalibrate , I read turning 2 screws at a time is preferred. Where should I start and what 2 screws for each position.
Thanks!
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion