Results 1 to 5 of 5
Threaded View
-
01-24-2015, 07:56 AM #1
- Join Date
- Dec 2014
- Posts
- 42
PowerSpec3D Spacer for a 1/4" glass build plate?
The aluminum bed on my PowerSpec3D isn't quite level, so I bought a piece of 1/4" Borosilicate Glass. Then I started reading that the spacer for the FF Creator, wouldn't work on this machine.
Is anyone else out there using a glass bed? What are my options?
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion