I am enjoying having ABL working with my i3v 12, except that it has made my working area smaller then before
the issue im having is that the ABL servo probe is 50mm offset from my nozzle
so right now ive set a X axis endstop aprox 50mm inwards.. same goes for Y (but less)

If I keep my endstops where they were before i had ABL, and the Probe offsets set right, the prob tries to do a reading off the left side of the bed in open air
and if i dont catch it.. i will end up with a head crash

i have attached my current config.h file if someone can please have a look and let me know what they think i should do

my bed is 300mm x 300mm minus the space for glass clips 20mm each side = 260mm x 260mm

my probe offset is

#define X_PROBE_OFFSET_FROM_EXTRUDER 51
#define Y_PROBE_OFFSET_FROM_EXTRUDER -8
#define Z_PROBE_OFFSET_FROM_EXTRUDER -9.8

Configuration.h