Results 1 to 2 of 2
Thread: Trying to calibrate issue
Threaded View
-
01-18-2015, 07:37 PM #1
- Join Date
- Nov 2014
- Posts
- 4
Trying to calibrate issue
I'm a new owner of a Flashforge Creator X Dual head, and I'm working on calibrating the print heads. I am currently working on the left head, and this is my first test print after some initial tweaks. I'm not sure what is causing this issue. I am testing this with Hatchbox transparent red PLA, printing at 210C.
If you can see the edge, it looks like it has uneven starting/stopping. What would be causing this?
Jon
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help