Results 1 to 10 of 17
Thread: Motor trouble
Threaded View
-
12-17-2014, 01:51 PM #1
- Join Date
- Dec 2014
- Posts
- 40
Motor trouble
I'm having problems with the x-axis motor on my Creator Pro. I'll start a print, and when it's travelling to the home axes it moves fine. Then at some point during the first layer, it starts jamming/skipping, totally messing up the print as well as losing its position each time it skips. I cancel the print and go to jog mode and find that in +x and -x it is jamming and skipping like crazy. Then I power off the machine and turn it back on, go to jog mode, and the motor is working perfectly fine again. It only gets messed up once I start a print job again and can only be fixed by rebooting the machine.
I've attached a video to show what the jamming/skipping looks like. Has anyone had this problem before? I'm thinking it may be a problem in the electronics controlling this motor as opposed to a mechanical issue inside the motor itself.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help