Results 1 to 7 of 7
Threaded View
-
10-25-2014, 02:54 AM #5
- Join Date
- Jun 2014
- Posts
- 74
I never have a problem with breakage if I remove prints between 30 and 40c. 30c is generally a little easier to do just a little pressure by hand. At 40c sometimes I need to use slight pressure with a blade but never break or warp a part. Much above 40c gets difficult and risky if a thin walled part.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion