Results 1 to 10 of 757
Threaded View
-
10-22-2014, 07:11 AM #11
- Join Date
- Jul 2014
- Location
- Eastern Colorado
- Posts
- 536
I uncommented the two EEPROM defines in configuration.h, and removed my +4 from marlin_main. Compiled and uploaded, sent a M502 then a M500, then ran G28 through pronterface, followed by G1 Z0. Nozzle stopped 4mm above the bed. Re-commented the EEPROM defines, re-added my +4, and uploaded.
Last edited by AbuMaia; 10-22-2014 at 07:20 AM.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion