Results 1 to 10 of 22
Threaded View
-
10-12-2014, 09:08 PM #1
- Join Date
- Sep 2014
- Posts
- 18
i3v 10" Bed flexing downward (impacting Y idler bracket)
Anybody ever had this? The eccentric spacers aren't overtightened, but the bed is still "bowed" downward, which makes it strike the top of the Y axis idler bracket. Since this is well before the Y endstop, this caused the motor to get very unhappy on a trip to Home, and start skipping teeth, and make an awful noise, trying to get to the Y endstop. I suppose a picture is probably in order. :/
20141012_220938.jpgLast edited by theAut0; 10-12-2014 at 09:19 PM.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion