Results 1 to 10 of 18
Thread: Print Lifting
Threaded View
-
09-06-2014, 07:47 AM #1
- Join Date
- Aug 2014
- Posts
- 5
Print Lifting
hi guys im having real problems atm with my print lifting i have put new tape on hoping that would solve the problem but no luck. i have a heated bed and its heated to 110 as it came out of the shop.
is this too hot is that the problem? is there something else i can put down to help it stick? i have heard of pva glue put down but not sure if that was for a heated bed. oh im printing in abs.
thanks for your help in advance rich
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion