Ok here is where I am at. I have printed off the parts from thingiverse to mount my servo and mount my switch. I have a servo and a switch. Doing the mechanical part is going to be easy. Doing the measurements are also easy. Here is where I need the help. I see different items people are saying edit prontoface or pronterface or something... and other things that I need to edit to enable the Auto Bed Leveling and that is where I am lost. Where is a good place to start reading about this, and where do I get this prontoface? I am wanting to get the bed leveling software and hardware working this weekend if possible. I am pretty sure I have everything hardware I need and before I go in and change my printer, I want to make sure if there is anything else I need to print I can do that.

After I get this enabled, I want to make sure that it is configured as well, and then I can go in and start working on making sure the print quality is at its best. I have started printing some prototype parts, and some 3d parts for scale rc trucks and want to start printing homes really soon. Just want to make sure everything is set up as close as possible.

I really appreciate the help I get from here. You guys are the best. Thank You.