Results 1 to 2 of 2
Thread: .8 mm too big!
Threaded View
-
07-12-2014, 11:57 PM #1
.8 mm too big!
Hey all I have finally got my prusa i3 going and printing some good stuff. However everything is 0.8mm to big in the x and y directions for example If I print a 20mm test cube its actually 20.8mm in the x and y directions. How do I go about making my prints dimensionally perfect? I have checked that the x and y axis both move 100mm when commanded to in pronterface so I know they are calibrated correctly.
At the moment I am just adjusting the scale in slic3r to get the dimensions correct but there must be a proper way of doing it?
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion