Results 1 to 10 of 16
Thread: How do I draw this in 3d?
Threaded View
-
08-27-2021, 07:08 AM #7
- Join Date
- Aug 2021
- Posts
- 6
I think I read it wrong and your wanting the sleeve to go over the nozzle then use a knife. You have to mind and use material thickness so your inside of your sleeve will be the outside of the nozzle. I see your tip has 14mm diameter at the top. if you have a 1mm wall then it will obviously be 12mm inside that then gets cut. Send me the dimensions that you want the finished nozzle to be.
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help