Results 1 to 2 of 2
Threaded View
-
09-12-2020, 03:35 PM #1
- Join Date
- Sep 2020
- Posts
- 1
Ender 5 plus - SKR 1.4 Turbo Mods Not Working :(
Hi All
I havbe spent so much time reseraching and consistently updating my firmware but alas i still cannot get the printer to function correctly, no doubt its something stupid but im at the end of my tether and knowledge.
My specs and mods for the printer are as follows:
- Ender 5 plus
- Complete hot end revision with an E3D Titan Aero Extruder and V6 Nozzle
- BTT SKR 1.4 Turbo Mainboard with TMC2209 Drivers
- BTT TFT35- E3
Im using version 2.0.5.3 of Marlin wiht Kay3d cheetah 5.0 interface
Please find attached a couple of photos of my board and print head and a RAR file containing the Configuration.h and Configuration_adv.H
i cant seem to get the axis to home no matter what ive tried, and gives me the 'printer halted. kill() called' error.
Let alone started printing anything.
Im begging for help at this point and cant seem to rectify the issue myself
Thanks in advance to any help
Ashley
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help