Results 1 to 4 of 4
Threaded View
-
04-21-2014, 09:35 AM #1
- Join Date
- Jan 2014
- Posts
- 3
Initial 5-6 layers are shifting to the left
Hi all,
The initial 5-7 layers in my print are shifting to the left (as shown in the attached picture) but the layers after these print ok. I have tightened the belts, screws and nuts but could not fix the issue.
The gcode file itself is good because a friend of mine can print without this issue from the same file.
Has anyone faced a similar issue or Can anyone suggest some fix i can try ?
Thanks
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion