Results 1 to 10 of 15
Threaded View
-
05-13-2019, 08:17 AM #12
Have you found the secret setting of 3D Printing the smaller more detailed models.
If No then Continue.
In my printing of PLA it likes to be printed between 192-202C with a Bed temp of 40-60C.
Depending on your 3D Printer the start speed can be a 30-50% as compared to the 100% set in the slicer as full speed.
After the first layer has printed you can increase the print speed. I can print from 72-86% near perfect Models quite easily though have printed faster with a few Print flaws.
I have in the forums uploaded my Cura's profiles they include Cura 15.04.6 - Cura 4. An have used other slicers thou continue using my trusty Cura slicers.
Again here are my Cura Profiles
Design not printing solid
09-17-2024, 06:12 AM in 3D Modeling, Design, Scanners