Close



Results 1 to 10 of 19

Threaded View

  1. #1

    Recommendation for a 3d printer for a beginner

    I want to enter the 3d printing world and after doing quite a bit of research into selecting a printer (and almost finding a good one), I am still having trouble finding the right one, so I thought I should ask for assistance.

    Basically, this is what I'm looking for:

    1. Cost <= $600. A bit more is okay if really necessary.
    2. A printer that would work out of the box and is easy for beginners to begin with. NO DIY.
    3. A printer that does not need repair every few months. I have almost chosen the QIDI X-One 2 but found out that something always breaks there.
    4. Optional - a printer that would work with any type of filaments and not just company specific ones.

    Forget about what I wish to print, this is not important at the moment. Please just recommend me a printer that complies with the above requirements.

    Thank you.
    Last edited by nettek; 12-01-2018 at 01:42 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •