Results 1 to 10 of 19
Threaded View
-
04-11-2014, 01:33 AM #11
- Join Date
- Apr 2014
- Posts
- 5
No glue, tape, spray, juice....just a good clean heated sheet of glass. I keep the heat on the whole print or the glass will contract and pop the printed part off. Every other print, I give the glass a good wipe down with isopropyl after scrape with a boxcutter blade.
Mendel90, 0.3mm j-head Mk5 1.75mm, and PLA from Diamond Age here in NZ.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion