Results 1 to 7 of 7
Threaded View
-
11-26-2017, 12:43 AM #1
- Join Date
- Nov 2017
- Posts
- 4
Printer LCD Glitches After Starting Preheat
Hi there,
I bought a RepRap printer Prusa i3 clone from Amazon.
I got it and when I assembled it.
It turns on perfectly and I can use the LCD Menus.
But as soon as I start a print or preheat the Hot End and Bet. The screen and LED on the MKS MakerBase board goes crazy. Black-On-Black-On until I unplug it.
The PSU is working. I also tested the PSU under load and it works.
Here is a video of the problem:
https://www.youtube.com/watch?v=396wx5WQzKw
I contacted the seller and they said that they will send a new MakerBase board. I bought the Printer with Amazon Prime so it came to my house the same day I ordered it.
But the customer service rep says it will take 15 days for the part to arrive from China.
I want to think that it is an issue I can fix on my own while I wait for the new part.
Anyone know how to fix this?
Thanks,
Ardalan G.
Holes and pockmarks in print walls
Yesterday, 09:14 AM in General 3D Printing Discussion