Results 1 to 10 of 15
Threaded View
-
10-15-2017, 01:06 PM #5
With Power disconnected.
Measure resistance across RT1 (Thermal Fuse ) or (Thermal Resistor) is should have very low resistance.
and Please do the Same for the Fuse. Did you remember to switch SW1 the 220/120 volt switch to 120volt.
The reason I ask is fuses do not normally have a black ring around the glass, unless the fuse is blown.Last edited by Roberts_Clif; 10-15-2017 at 01:39 PM.
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help