Results 1 to 10 of 21
Thread: Printbite ... wont bite!
Threaded View
-
08-26-2017, 03:11 PM #4
Slow your first layer print speed to around 10%.
bed temp for pla, i use 50c.
Pla print temp i use 210.
Print area fan off for first layer.
If it's dragging it up, then it's generally because you're printing first layer too fast.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion