Results 1 to 10 of 11
Thread: My layers are not solid
Threaded View
-
03-07-2017, 08:40 AM #1
- Join Date
- Mar 2015
- Location
- Fenton, MI
- Posts
- 63
My layers are not solid
Hi folks. I've searched the wisdom that is google and am still at a loss.
I'm printing with a Prusa iv3 10".
I have calibrated and adjusted my extruder
.40 nozzle printing at 194 on a bed heated to 64 on glass
I've used different slicers, and changed the settings I understand, and a few I don't. No matter what I get these results. Basically, my layers are not solid, they end up being a screen.
Here's a picture of the 2nd or 3rd layer of a print last night:
During this print I used the ramps board to up the flow to 120 (120%??) and I had evidence of over extrusion. That makes me think I am extruding the proper amount of filament.
This print was .15 layer height.
Do you need any more info? Do you have any ideas?
Thanks for reading.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help