Results 1 to 2 of 2
Threaded View
-
02-19-2017, 12:39 PM #1
- Join Date
- Feb 2017
- Posts
- 1
HELP - Bed Leveled, Z axis looks like its raising during print - not sticking
I just leveled my bed twice. Hit print, noticed the filament was not sticking to the bed, looked down and noticed that the head is raising up 5x higher then where it lays when leveling/at Z's 0.
Help? Does anything know why this is happening? The G-Code is correct, I even selected an old print and it did the same thing to that print as well.
Bed is Leveled - GCode Normal
Printer - MP Select Mini
Holes and pockmarks in print walls
Yesterday, 09:14 AM in General 3D Printing Discussion