Results 1 to 10 of 13
Thread: Layers not smooth
Threaded View
-
12-27-2016, 12:22 PM #2
- Join Date
- Apr 2016
- Posts
- 120
Looks like some play in one of the axis. There is a bit of wobble going on as well.
I don't think that temperature is a problem and TBH 1 degree is less than the stable temp that the printer will sustain anyway. You will find if you measure it that is will vary by about 3-5 degrees over the plate (Quite possibly more) and will cycle over a similar range due to the binary nature of the heating.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion