Results 1 to 10 of 13
Thread: Layers not smooth
Threaded View
-
12-27-2016, 11:41 AM #1
- Join Date
- Dec 2016
- Posts
- 11
Layers not smooth
Hi,
I'm trying to print a part in lulzbot taz 6, but the layers don't seem to be coming out right, on one side the layers come out perfectly, but on the other side there is this. I was wondering if anyone here could enlighten me on how to fix this, or what might be causing the issue in the first place. I doubt that it has anything to do with the room temperature, as the temp is around 31 degrees celsius. The object was positioned with the good side facing towards you and the bad side facing away from you, every time the side that did not have a smooth layer was the side that was facing away from you. The material that I'm using is ABS, the printing temperature is 240, and the bed temperature is 111. The bed temperature is 111 to compensate for the approximate 1 degree loss in temperature when the bed moves. This is the entire part and how it was positioned on the bed.
Side 1
Side 2
Side 3
Side 4
Thanks!Last edited by Roy; 12-27-2016 at 11:52 AM.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help